| 项 目 (Item) |
数 据 (Data) |
| 认证(APPROVAL) |
/ |
| 测试标准(Test standard) |
IEC61984 / UL1059 |
| 产品间距(Pitch) [mm] |
7.5 |
| 极数(Poles) |
04P |
| IEC61984测试数据（IEC61984 Test data) |
/ |
| 额定电压(Rated voltage) [V] |
/ |
| 额定电流(Rated current) [A] |
/ |
| 额定连接容量(Rated connection capacity)(solid/stranded) [mm2] |
/ |
| 过压类别/污染等级/绝缘材料组别
(Surge voltage category/pollution degree/material group) |
/ |
| 额定冲击电压(Rated impulse voltage) [KV] |
/ |
| 额定扭矩(Rated torque) [N·m] |
/ |
| UL1059测试数据（UL1059Test data) |
UL 1059 |
| 应用组别(Use group) |
B |
C |
D |
| 额定电压(Rated voltage) [V] |
600 |
/ |
/ |
| 额定电流(Rated current) [A] |
35 |
/ |
/ |
| 额定连接容量(Rated connection capacity) (solid/stranded) [AWG] |
24-8 |
| 额定扭矩（Rated torque） [Lb. in] |
/ |
| 通用数据(General data) |
/ |
| 阻燃等级(Inflammability class)UL94 |
V-0 |
| 环境温度(Ambient temperature) [℃] |
-40~+105 |
| 相对湿度(Relative humidity) |
5%-95% |
| 抽样检验标准(Inspection standard） |
MIL-STD-105E II |
| 允收水准(AQL) |
0.65 |
| 保质期(Warranty) |
12 months |
| 材质和电镀(Material and plating) |
/ |
| 绝缘材质(Housing) |
PA66 |
| 螺丝(Screw) |
/ |
| 触点材料(Contact) |
Copper alloy，Sn plated铜合金，镀锡 |
| 方盒(Cage) |
/ |
| 接线方法 (Wire connecting) |
| 推荐剥线长度14-15mm; Recommended stripping length14-15mm; |
| 1.）单股硬导线，剥好对应长度的导线后，用额定的扭力拧紧；
For solid wire, stripping wire to the appointed length, then tightening with rated torque. |
| 2.）多股柔性导线，剥好对应长度的导线后，可以直接连接或者配套使用对应标准规格的冷压端头，用额定的扭力拧紧；
For stranded wire: stripping wire to the appointed length, mating with corresponding type of ferrule, then tightening with rated torque.
|
| 注意事项：扭力要平稳，不能使用爆发力；( Tightening process should be steady, can’t use explosive force.) |
